Plastic PCB Socket with Long Bent Pins
The P Series PKG long elbow-pin socket adds right-angle bent PCB tails to the plastic fixed socket, so the connector can be soldered onto a board mounted behind the panel. The hex nut clamps the plastic body through the panel and the contact block matches the PAG plugs, covering 0P to 3P shells.
Key features
- Long right-angle bent PCB pins for board mounting
- Hex nut fixing through the panel
- 0P / 1P / 2P / 3P shell sizes
- PC shell, PPS insulator, brass gold-plated contacts
- > 2,000 mating cycles, -25 °C to +150 °C
Specifications
| Item | Value |
|---|---|
| Shell sizes | 0P (10 mm) / 1P (14 mm) / 2P (17 mm) / 3P (20 mm) |
| Contacts | 2–32 (see P Series electrical tables) |
| Protection | IP50 / IP64 / IP66 by size (mated) |
| Mating cycles | > 2,000 |
| Temperature | -25 °C to +150 °C |
| Termination | Long elbow-pin PCB |
Typical applications
Suited to medical device mainboards and laboratory instrument control boards where the plastic connector is soldered directly behind the front panel.
Request drawings and samples
Tell us the shell size, contact count and PCB hole pattern, and we will confirm the PKG code and pin-out drawing.
Request product details
