Machine Vision & Industrial Cameras
Industrial cameras and vision modules need a small, repeatable connection between camera head, harness and controller. The HR Series was designed for exactly this task: 4, 6, 8, 10 or 12 pins in a compact shell, with push-pull or threaded locking, solder or PCB terminations, and variants for fixed and floating mounting on the camera side.
Pin counts matched to camera heads
HR10 covers 4/6/8/10/12 pins; the larger HR25 shell serves higher pin-count camera heads and multi-signal modules.
Push-pull or threaded locking
Choose push-pull locking for frequent re-configuration and threaded (T version) locking where vibration must not move the plug.
Floating sockets absorb alignment
HR10 floating sockets compensate hole position tolerance on camera brackets, protecting contacts during mating.
Rated for the electronics bay
IP50 protection and a -20 °C to +80 °C working range suit indoor vision cells, instruments and automation cabinets.
Соединители для этого применения
Подбираете соединители для проекта?
Сообщите нам число контактов, степень защиты, способ оконцевания и диаметр кабеля вашего применения, и TRCONN рассмотрит требование и подготовит ответ по подбору.